Pelco C1306M Getting Started

4 C1306M (8/05)

Getting Started

Thank you for purchasing Pelco’s ExSite

™

EHXM Series explosionproof system. This manual includes instructions for installing all the components

of the system. Once the system installation is complete, refer to the operation/programming manual for instructions on how to operate and pro-

gram your system.

The system can be installed in a standard or inverted position. When installed for inverted operation, the camera orientation and controller

functions are reconﬁgured for normal operation through the system’s software. Hardware adjustment is not required for inverted operation. Refer

to Figure 1 for installation methods.

Figure 1.

Methods of Installation

WARNINGS:

•Total weight of the system is 34.7 lbs (15.71 kg). Use caution when lifting and assembling the enclosure component on the power

module. It is recommended that non-slip gloves be worn during installation.

• Do not turn the body of the enclosure more than 200° in either direction or damage to the power module cable may occur.