Pelco C1420M-H manual Specifications, Electrical, General

Specifications

Electrical
Input Voltage	120 VAC (230 VAC optional) for heaters
Power Consumption (heater)	80 watts
Connector	16-pin jam nut receptacle
Maximum Cable Distances
(120 VAC)	16 AWG (0.5 mm2)	2,238 ft (682 m)
	18 AWG (1.0 mm2)	1,410 ft (430 m)
	20 AWG (1.5 mm2)	886 ft (270 m)
(230 VAC)	16 AWG (0.5 mm2)	8,224 ft (2,507 m)
	18 AWG (1.0 mm2)	5,182 ft (1,579 m)
	20 AWG (1.5 mm2)	3,257 ft (993 m)
Heater	Two 40 watt, 120 VAC. Heaters are thermostatically controlled to activate ON at 40°F (4°C) and OFF at
	60°F (16°C)
General
Construction	Aluminum 6061 T6
Finish
Outside	Polyester powder coat
Inside	Black anodized
Dimensions	See Figure 3
Front Window	6-inch diameter tempered glass, 0.225-inch thick
Maximum Camera/Lens Size	5" diameter x 18" long (12.7 x 45.72 cm)
	or
	18" L x 4.0" W x 4.0" H inches (45.72 x 10.16 x 10.16 cm)
Enclosure Mounting	RediLINK 26-pin connector mates enclosure to pan/tilt
Purge Fitting	Standard Schraeder valve to allow enclosure to be filled with dry nitrogen
Purge Relief Fitting	Prevents over-pressurization of enclosure
Weight	17.2 lb (7.8 kg)
Ratings	Meets NEMA Type 6 and IP 67 standards

C1420M-H (1/07) 9