C1555M-F (10/05) 37
Programming Your System
When you open CM9700-MGR, the Getting Started dialog box appears..
Figure 27. Getting Started Dialog Box
The CM9700-MGR provides the following configuration options:
•Setup Wizard: This option opens the Setup Wizard (a series of dialog boxes), which provides assistance in setting up a new system.
•New System: This option opens the CM9700-MGR main window with a blank system. Use this option when you want to create a new
system configuration from scratch.
•Open: This option allows you to open a CM9700-MGR system design file (a .psm file).
•Import Configuration Files: This option allows you to import configuration files. You can use this option to import the following types of
files:
– Configuration files that have been copied from the CM9700-CC1 (note, however, that copying configuration files from the CC1 is not
recommended; the *.psm file generated from the CM9700-MGR provides more complete descriptions of system settings)
– CM9760-MGR configuration files (also known as “flat files”) created for a System 9760 or System 9740.
Detailed instructions for using the 9700 System Manager are provided in the CM9700-MGR Software Guide which is included in the System
9770 binder.
NOTE: When Pelco customizes your system at the factory, system settings are saved in the *.psm file, which is provided to you on the CD
labeled “CD-CM9700CONFIG” (provided in your system binder). The accompanying sets of configuration files have been transferred to the
CM9700-CC1 at the factory. Any system changes should start by opening the *.psm file. (With previous CM9760-CC1 and CM9700-CC1
systems, configuration files were used for system changes. With the current system, however, configuration files are handled only as an
output from the *.psm file.)