Pelco c2235m important safety instructions To attach the PMCL-V100 to a monitor mount

To attach the PMCL-V100 to a monitor mount:

1.Use the 10-32 x 3/4-inch pan head Phillips screws, #10 split lock washers, and hex nuts (supplied) to secure the adapter plate to the monitor mount. Refer to Figure 1.

ADAPTER PLATE

HEX NUT

#10 SPLIT LOCK WASHER

PMCL-WM1A MONITOR MOUNT

10-32X3/4 PHILLIPS SCREW

Figure 1. Attaching the PMCL-V100 Monitor Mount Adapter to a Monitor Mount

2.Attach the monitor mount to the monitor. Align the monitor to the correct hole pattern on the mounting plate. Use the M4 x 0.70 x 6 mm screws (supplied) to secure the monitor to the mounting plate. Refer to Figure 2.

PMCL-WM1A MONITOR MOUNT

PMCL-V100 ADAPTER PLATE

M4X10MM PHILLIPS SCREW

Figure 2. Attaching the PMCL-V100 Adapter and Monitor Mount to a Monitor

3. Refer to the installation manual shipped with the Pelco monitor mount for further instructions.