Pelco C2237M manual Installation, Ceiling Mount

Installation

CEILING MOUNT

Figure 1. Ceiling Mount Installation

To install the mount to a ceiling refer to Figure 1, and then complete the following steps:

1.Pull the wire and cable for the camera through the mounting plate, and then attach the mounting plate to the mounting surface (hardware not supplied).

2.Attach the ball socket to the threaded stud on the mounting plate.

3.Attach the camera to the 1/4-20 threaded stud on the ball socket, and then tighten the adjustment ring, and then tighten the adjustment ring.

4.Use an 1/8-inch Allen wrench (not provided) to loosen the set screw on the ball socket to position the camera, and then retighten the set screw.

6 C2237M (1/08)