Pelco C2237M manual T-Railmount

T-RAIL MOUNT

Figure 4. T-Rail Mount Installation

To install the mount to a T-rail refer to Figure 4, and then complete the following steps:

1.Twist the T-rail clip onto the T-bar.

2.Attach the ball socket to the threaded stud on the T-rail clip.

3.Attach the camera to the 1/4-20 threaded stud on the ball socket.

4.Use an 1/8-inch Allen wrench (not provided) to loosen the set screw on the ball socket to position the camera, and then retighten the set screw.

5.Connect the wires and cable to the back of the camera (refer to the Installation/Operation manual supplied with the camera for instructions).

C2237M (1/08) 9