MAINTENANCE
Regularly scheduled maintenance is not required. If the mount has been installed outdoors, peri-
odically check the sealant around the bolt holes for water damage.
SPECIFICATIONS
GENERAL
Construction: 0.25-inch (.63 cm) aluminum
Finish: Gray polyester powder coat
Mounting Method: Six 0.413-inch (1.05 cm) holes on rear surface
Maximum Load: 300 lb (136.08 kg)
Environment: Indoor/outdoor
Operating Range: 32° to 120°F (0° to 49°C)
Weight: 15.6 lb (7.1 kg)
Dimensions: See Figure 2
MECHANICAL
Pan Adjustment 360°
Tilt Adjustment ±90°
Cable Entry: One cable entry hole on top of mount arm. Two 3/4-inch NPT threaded holes
(one on each side); can be used for conduit. Three hole plugs provided to
cover unused holes.
Suggested
Mounting Method: Secure to wall with six 3/8-inch diameter fasteners of suitable size (not sup-
plied)
(

Design and product specifications subject to change without notice.)

Figure 2. WM3026 Dimension Drawing
NOTE: VALUES IN PARENTHESES ARE CENTIMETERS;
ALL OTHERS ARE IN INCHES.
8.31
(21.11)
8.50
(21.59)
5.87
(14.91)
27.31 (69.37)
28.75 (73.02)
7.00
(17.78)
8.31
(21.11)
6.5
(16.51)
6.5
(16.51)
20.88
(53.04)
5.50
(13.97)
7.00
(17.78)
16.00
(40.64)
6.00
(15.24)