14 C2937M-C (4/08)
Video 1, Video 2, S-Video, Component Mode Menu Field Definitions
Input: Select VIDEO 1, VIDEO 2, S-VIDEO, RGB, DVI, or COMPONENT.
Contrast: Adjusts the black level of the video screen image (0 to 100).
Brightness: Adjusts the white level of the video screen image (0 to 100).
Color: Adjusts the color saturation of the video signal (0 to 100).
Sharpness: Adjusts the picture softer or sharper (0 to 15).
Tint: Adjusts the range of color: green to red (0 to 100).
3D Noise Reduction: Reduces the background noise of the video signal (NR ON or OFF).
Language: Select ENGLISH, ITALIAN, FRENCH, SPANISH, or GERMAN for the OSD display.
Panel Buttons: Select UNLOCK or LOCK, and then press Enter to lock/unlock the buttons on the front panel. Authorized users can release the
key lock feature by pressing and holding the SOURCE button for five seconds.
PIP: Select SETUP for the picture-in-picture, and then select one of the following options:
•PIP Option: Select PIP OFF, PIP ON, or PBP ON.
•PIP Input: Select VIDEO 1, VIDEO 2, S-VIDEO, or COMPONENT.
•PIP Location: Select the PIP position as T/L (top left), T/R (top right), B/R (bottom right), or B/L (bottom left).
•PIP Size: Select the PIP size as LARGE, SMALL, or NORMAL.
•PIP Swap: Select SWAP to interchange Main with PIP by pressing the ENTER button twice.
Only limited inputs can be selected while in PIP mode, based on the main video source in use (refer to Table B):
Scan Mode: Select UNDER, 16:9, OVER, or 4:3 .This is in the Video menu.
OSD Setting: Select SETUP for the on-screen display. Then select one of the following:
•OSD H.Position: Adjusts the OSD horizontal position (0 to 100).
•OSD V.Position: Adjusts the OSD vertical position (0 to 100).
•OSD Display Time: Select OFF or a range of 5-30 seconds.
Color Temperature: Select NORMAL, COOL, or USER. If you select USER, then select from the following calibrations:
•R-Gain: Adjusts the gain for red (0 to 100).
•G-Gain: Adjusts the gain for green (0 to 100).
•B-Gain: Adjusts the gain for blue (0 to 100).
•R-Offset: Adjusts the offset (or cut) for red (0 to100).
•G-Offset: Adjusts the offset (or cut) for green (0 to 100).
•B-Offset: Adjusts the offset (or cut) for blue (0 to 100).
•Reset: Select RESTORE to return to the original color temperature settings.
Default Setting: Select RESTORE to return to the default settings.
Information: Select INFORMATION to access Pelco headquarters information.
Table B. PIP Mode Inputs
Main Video Source Accessible PIP Inputs
Video 1 S-Video, Component, Video 2
Video 2 S-Video, Component, Video 1
S-Video Component, Video 1, Video 2
RGB Component, Video 1, Video 2, S-Video
DVI S-Video, Component, Video 1, Video 2
Component Video 1, Video 2, S-Video