4.7.2. Access control

4.Setting up the instrument

4.7.2. Access control

‘Operator’ symbol

‘Supervisor’ symbol

The Leica ASP300 may be configured to allow two levels of user ac- cess.

Operator access level:

Operators may run programs and view results. On this level, the OP- ERATOR symbol is displayed in the upper right corner of the touch screen.

Supervisor access level:

Supervisors may perform all Operator functions, and additionally cre- ate programs and perform the instrument sit-up functions.

To access Supervisor level, press SUPERVISOR, enter the required password and confirm. The SUPERVISOR symbol will then be dis- played instead of the OPERATOR symbol and all enabled buttons will be surrounded by a black border instead of a blue one.

Lock feature against unauthorized use

The Leica ASP300 provides a feature called "Lock" to prevent ac- cess to any operations of the Leica ASP300 to unauthorised users.

The ‘Lock’ mode and the corresponding ‘Lock’ password are config- ured from the SYSTEM SETUP menu.

Leica ASP300

27

Page 27
Image 27
Leica ASP300 instruction manual Access control, Setting up the instrument