4.Setting up the instrument
26
1
37
48
5
The following functions can be selected: 1 - Access for service engineers only.
2 - Access INSTALLATION menu.
3 - Abort the current program.
4 - Abort the current program and delete the current allocation of reagents to reagent bottles and retort.
5 - Delete all programs and reset instrument status (all lists will be empty).
6 - Store actual instrument status on floppy disk.
7 - Display run log.
8 - Restart instrument.
Fig. 10
System diagnostics menu
If, during initialization, ‘Touch here
...’ is touched (refer Fig. 7) and sub- sequently the supervisor pass- word is entered, the SYSTEM DIAGNOSTICS menu (Fig. 9) opens up, giving access to standard in- strument settings.
Attention!
Serious instrument malfunctions may occur if any settings are modified wrongly.
Fig. 9
To exit this menu, the instrument has to be re- started - press: RESTART APPLICATION.
Press YES to confirm ‘ARE YOU SURE YOU WANT TO ...’ (refer Fig. 10) .
•Initialization starts again from the screen shown in Fig. 7.
Leica ASP300 | 25 |
