Pelco C2946M operation manual Setup Menus, Function SET

SETUP MENUS

The camera default settings are set at the factory to operate in most applications and lighting conditions, and normally require no adjustments. Sometimes, however, adjustments may be necessary.

Use the setup menus to customize the camera settings for your application as needed. Refer to the Installation/Operation manual (C2946M) for complete instructions and explanations of camera settings.

MAIN MENU

PROFILES	->
EXPOSURE SET.	->
FUNCTION SET.	->
SAVE AS CUSTOM	->
PIXEL CORRECTION	->
SYSTEM INFORMATION	->

EXIT

PROFILES

STANDARD

GAMING

CUSTOM

BACK EXIT

EXPOSURE SET.

AUTO EXPOSURE		-> ESC
ECLIPSER		-> OFF
DC IRIS LEVEL		-> -4
FLICKERLESS		-> OFF
AGC		-> LOW
BACK	EXIT

FUNCTION SET.

LINE SYNC		-> AUTO
WHITE BALANCE		-> AUTO
CHROMA		->
GAMMA		-> 60%
SHARPNESS		-> SHARP
CABLE COMPENSATION		-> SHORT
MASKING		->
TITLE		->
BACK	EXIT

SAVE AS CUSTOM

CURRENT SETTING

ARE SAVED

OK CANCEL

PIXEL CORRECTION

COVER THE LENS

AND PRESS OK

OK CANCEL

SYSTEM INFORMATION

FIRMWARE VERSION		#.##
OSD VERSION		#.##
RESTORE FACTORY SETTINGS		->
RETURN	END

		ECLIPSER
ECLIPSER		-> OFF
THRESHOLD		-> 17
LEVEL		-> 4
BACK	EXIT

		LINE SYNC
LINE SYNC		-> AUTO
V-PHASE ADJ		-> 38
BACK	EXIT

		MASKING
MASK		-> OFF
MASK COLOR		-> -2
MASK EDIT		-> 0
MASK ERASE
BACK	EXIT

	TITLE
TITLE	-> OFF
EDIT TITLE
BACK	EXIT

RESTORE FACTORY SETTING

ALL SETTING ARE

INITIALIZED

OK CANCEL