Pelco C3420M manual Specifications, General, ELECTRICAL Dome Drive Only

Specifications

GENERAL

Construction
Back Box	Aluminum
Dome Drive	Aluminum, thermoplastic
Lower Dome	Clear polycarbonate, 0.09-inch
	thick
Cage Thickness	0.12 x 0.30-inch cast stainless steel
Cage Color	Black, for maximum discreetness
Cable Entry (Back Box)	Through 1.5-inch NPT pendant
	mount
Pan Movement	360° continuous pan rotation
Vertical Tilt	+2° to -92°
Manual Pan/Tilt Speeds*
Pan	0.1°- 80°/sec manual operation,
	150°/sec turbo
Tilt	0.1°- 40°/sec
Preset Speeds

Weight (approximate)
Back Box
Pendant	4.45 lb (2.02 kg)
Environmental Pendant	4.75 lb (2.15 kg)
Dome Drive	3.3 lb (1.48 kg)
Lower Dome
Pendant	1.83 lb (0.83 kg)
Pendant with Cage	3.83 lb (1.74)

ELECTRICAL (Dome Drive Only)

Input Voltage	18-32		VAC; 24 VAC nominal
	22-27		VDC; 24 VDC nominal
Input Power
24 VAC	23	VA nominal (indoor, without heater)
	73	VA nominal (outdoor, with heater)
24 VDC	0.7 A nominal (indoor, without heater)
	3 A nominal (outdoor, with heater)

Pan	400°/sec
Tilt	200°/sec
Environment	Indoor/outdoor
Operating Temperature
Pendant	32° to 140°F (0° to 60°C) absolute
	maximum; 32° to 122°F (0° to
	50°C) sustained maximum
Environmental Pendant	(Assumes no wind chill factor)
Maximum	140°F (60°C) absolute maximum ;
	122°F (50°C) sustained maximum
Minimum	-60°F (-51.1°C) absolute minimum;
	minimal icing at sustained mini-
	mum of -50°F (-45°C); prevents
	icing at sustained minimum of -
	40°F (-40°C); de-ices 0.1 inch

Fuse

Auxiliary Outputs Alarm Inputs

DUAL WALL

CONSTRUCTION

1.25 A

2 (Spectra IV SE only)

7 (Spectra IV SE only)

	10.1
	(25.65)
	7.5
	(19.05)
9.70	Ø6.13
	(Ø15.57)
(24.64)

(2.5 mm) within 3 hours after

power-up

NOTE: VALUES IN PARENTHESES ARE CENTIMETERS; ALL OTHERS ARE INCHES.

*For variable-speed operation an appropriate controller is required. With fixed-speed controllers, pan/tilt speed is 20°/sec. The CM6700/CM6800 controller with the KBD200A keyboard has programmable fixed speeds.

The materials used in the manufacture of this document and its components are compliant to the requirements of Directive 2002/95/EC.

This equipment contains electrical or electronic components that must be recycled properly to comply with Directive 2002/96/EC of the European Union regarding the disposal of waste electrical and electronic equipment (WEEE). Contact your local dealer for procedures for recycling this equipment.

14 C3420M (8/06)