GLOBAL SETTINGS
The Camera Sabotage behavior uses the following global settings:
Sensitivity: Defines the minimum motion or change in the scene that triggers an alarm. The default setting is 5; settings range from 1 (low) to 10 (high). Any movement with a value that is lower than the selected setting is regarded as noise. The higher the setting, the greater the chance for a false alarm. While a lower setting reduces the chance for a false alarm, it might also result in missed alarms.
Enable alarm: Turns on the alarm. If an alarm is enabled, alarm warnings are triggered and displayed in the Alarm Manager workspace. These events are listed in the system log.
Alarm severity: Defines the severity of an alarm. Available settings include Minor, Normal, Major and Critical. The default setting is Minor.
Delay before alarm: Defines the delay between the time a violation is detected and the actual trigger of an alarm. If the violation does not continue past the delay period, an alarm does not trigger. If the violation lasts longer than the delay period, an alarm is triggered. The default setting is 3 seconds.
RESET ALARM, BACKGROUND, AND DEFAULT SETTINGS
Profiles based on the Camera Sabotage behavior use the following additional commands:
•Reset Alarm: Resets an active alarm. If you reset an alarm manually while an object is still in the zone, a new alarm is triggered.
•Reset Background: Refreshes the background scene for the camera. Click this command any time the background scene is changed after the profile has been configured.
•Restore Defaults: Restores the default settings for the behavior in the profile.
RENAME A PROFILE
1.From the Device setup screen in the WS5000, display the Video Analytics tab for a camera.
2.Select a profile from the list, and then click the “Rename profile” button 
. The Rename Profile dialog box appears.
Figure 6. Renaming a Profile
3.Enter a new name for the profile, and then click OK. The new name appears in the profile list.
4.Click Apply to save your changes.
5.If necessary, restart any profile that was running before you renamed the currently selected profile.
8 |
