Pelco C561M-F manual Specifications, Electrical, Mechanical, General

Specifications

ELECTRICAL

Input Voltage	Selectable 100, 120, 240 VAC, 50/60 Hz via the Primary Line Input connector strip
Output
Voltage/Power	Selectable 24 VAC (Tap A), 26 VAC (Tap B), or 28 VAC (Tap C) at 100 VA via the
	Secondary Output Tap’s connector strip
Fusing	One fuse. Select from one of the following supplied fuses:
	Three 1.6 A fast-acting fuses (120 VAC)
	Three 500 mA fast-acting fuses (240 VAC)
Spare Fuse
Holder	Two spare fuse holders (attached to transformer cover)
Required Input
Current	1 amp

MECHANICAL

Contruction	Aluminum
Finish	Gray polyester powder coat
Cable Entry	Two hole plugs will accommodate 3/4-inch (1.91 cm) conduit fittings
	(not provided) that meet NEMA Type 4X standards.
Mount Method	Four 0.375-inch (0.95 cm) holes on mounting plate.
Latch	One stainless steel link-lock latch secured with screw; latch also can be secured
	with padlock (not supplied)

GENERAL

Environment	Indoor/outdoor
Operating Range	-50°F to 122°F (-45.56°C to 50°C)
Weight	6.84 lb (3.10 kg)
Dimension	See Figure 5

(Design and product specifications subject to change without notice.)

C561M-F (8/06) 9