Pelco C636M-E Figure 6. DX9100 Rack Mount Installation

18 C636M-E (4/05)
Figure 6. DX9100 Rack Mount Installation
To install the unit into an equipment rack:
1. Attach the two brackets to both sides of the unit.
2. Attach the mounting rails to the equipment rack.
3. Place the unit onto the mounting rails. It should slide in and out of the rack easily.
4. Fasten the rack ears to the equipment rack.
RACK
RECORDER/VIEWSTATION
(6)SCREWS, 8-32 X .250-INCH
PAN HEAD
(4)SCREWS,
10-32X .375-INCH
FLATHEAD
(8)SCREWS,
10-32X .375-INCH,
FLATHEAD
BRACKET
(SIDEVIEW)
SLOTTEDHOLES
TOWARDSFRONT
OFUNIT
TAPEREDENDS
TOWARDSREAR
OFUNIT
(4)SCREWS,
10-32X .750-INCH
PHILLIPS,PAN HEAD
WITHWASHERS
REAR MOUNTING RAIL
FRONT MOUNTING RAIL
(6)SCREWS,
8-32X .375-INCH,
PAN HEADWITH
WASHERS
RACK EAR