Pelco C636M-E - page 63

C636M-E (4/05) 63
8. Click Next. The following dialog box appears.
Figure 76. Dialog Box to Configure External 2 Source
9. Follow steps 3-7 if you want to define a second event.
10. Click Next. The Step 3 screen appears.
NOTE: The Step 3 and Step 4 screens are used for the relay unit configuration and the data translator configuration. You
do not have to enter any information in these screens for the alarm unit configuration. To exit, click Next and then Finish.
To configure a relay unit or data translator, refer to the sections on Connecting a Relay Unit or Connecting a Data
Translator.