C636M-E (4/05) 29
SETTING DATE/TIME PROPERTIES
Follow these steps to set the Date/Time Properties on the recorder and the viewstation. Make sure you close all applications
on the recorder and viewstation.
1. Double-click the time on the system tray. The following page appears.
Figure 18. Date & Time Page
2. Set the date and time and then click Apply.
3. Click Time Zone. The following page appears.
Figure 19. Time Zone Page
4. Select your time zone from the drop-down box. The default is (GMT -08:00) Pacific Time (US & Canada); Tijuana.
NOTE: You must restart the system if you change the default time zone setting on the recorder or viewstation. Do not
restart the system during the time synchronization setup.
5. Make sure that the “Automatically adjust clock for daylight saving changes” checkbox is selected, if applicable for the
location of installation.
6. Click Apply and then OK.