Pelco C662M-E - page 20

20 C662M-E (5/03)
Figure 10. Recorder Internet Protocol (TCP/IP) Properties Dialog Box
7. Enter the IP address (For example, 100.0.0.101). The last three digits must be different for each recorder (For example,
101, 102, 103, etc.).
8. Enter the Subnet mask.
NOTE: You may also have to enter your default gateway address and your DNS server address(es).
9. Click OK.
NOTE: After changing the recorder’s IP address, you must go to the Server Configuration Utility. The numbers in the last three
boxes of the “Multicast group” must match the last three numbers of this recorder’s IP address.
6. Double-click Internet Protocol (TCP/IP).