Pelco C6825 Description, Models, Installation, Specifications, Mechanical, Electrical, General

DESCRIPTION

The C6806 and C6825 are prewired cables used to connect PelcoÕs CX9024RX Coaxitron¨ receiver with PelcoÕs PT680-24P pan/tilt. These cables operate the pan/tilt in a noninverted mode.

MODELS

C6806 Six-foot (1.82 m) cable for use with PT680-24P, PT680-24SL pan/tilts and non-preset receivers (not for inverted operation)

C6825 Same as C6806 except 25-foot (7.62 m) cable length

INSTALLATION

1.Run the cable from the receiver to the pan/tilt. Be careful not to abrade or cut the jacket on the cable.

2.Connect the 37-pin CPC connector to the CX9024RX receiver.

3.Connect the 16-socket CPC connector to the PT680-24P pan/tilt.

4.Use a controller to test the following functions:

￿Pan Left

￿Pan Right

￿Tilt Up

￿Tilt Down

￿Zoom Wide

￿Zoom Tele

￿Iris Open

￿Iris Closed

￿Focus Near

￿Focus Far

If all the above functions operate correctly, the installation process is complete. If all the above functions do not operate correctly, refer to Troubleshooting.

SPECIFICATIONS

MECHANICAL

Connectors
Receiver Side:	CPC, 37 pins
Pan/Tilt Side:	CPC, 16 sockets

ELECTRICAL

Cable:	12 conductors with shield, 20 AWG
	6 conductors with shield, 20 AWG
	RG59/U

GENERAL

Dimensions
C6806:	6 ft (1.82 m) long
C6825:	25 ft (7.62 m) long
Maximum Wire
Temperature:	140°F (60°C)