Troubleshooting Guide and Error Messages
TROUBLE SHOOTING GUIDE
SYMPTOM | POSSIBLE CAUSE | SOLUTION |
|
|
|
Unit does not operate when Standby switch | • No AC power | • Make certain AC power cord is plugged into a live outlet. |
or remote |
| • Check to see if AC outlet is switch controlled. |
| • Main Power Switch is off | • Turn on Main Power |
|
|
|
Remote does not function | • Wrong deck selected | • Press the CDP button to control the Play Deck; |
|
| press the CDR button to control the Record Deck |
| • Dead batteries | • Replace both batteries |
| • Sensor blocked | • Remove obstructions from front panel or |
|
| connect a remote sensor to the |
|
|
|
Disc does not erase | • | • |
|
|
|
Recorded | • | • Finalize the |
another CD player or DISC ERROR |
| (see page 22) |
message appears in Play Deck |
|
|
|
|
|
Recording suddenly stops | • Input source stopped or paused | • Recordings will always stop when the input source |
|
| is paused for more than 3 seconds for digital recordings |
|
| and 10 seconds for analog recordings |
|
|
|
ERROR MESSAGES
ERROR MESSAGE | EXPLANATION AND PROBABLE CAUSE | SOLUTION |
|
|
|
CHECK DISC | • A | • Unfinalize the disc to add tracks to a |
| Finalized disc is in the Record Deck % | • Replace the disc with a blank |
| • A | • Replace the disc with a blank |
| standard CD is in the Record Deck % |
|
DATA DISC | • A |
| placed in the machine |
•Only CD Audio and DTS discs will play in the CDR 2; replace the disc
DISC | ERROR | • An Unfinalized disc has been placed in the Play Deck 3 • Finalize the disc (see page 22) | |
|
| • A DVD disc has been placed in the unit | • Replace the disc. The CDR 2 does not play or dub DVD discs |
|
|
|
|
DISC | FULL | • There is not enough time left on the disc to complete | • Use another blank |
|
| a planned recording | • Erase one or more tracks on a |
|
|
|
|
ERROR |
| • The dsic is not seated properly | • Open the drawer and check to see that the disc is properly seated |
|
| • There is a problem with the disc | • Try another disc |
|
|
| |
FAILED | • A dub has not been completed properly | • Check the play disc | |
|
|
| • Repeat the dub process |
|
|
|
|
FULL |
| • More than 20 tracks have been programmed | • Clear all programmed tracks over 20 (see page 18) |
|
|
| |
NO AUDIO | • A | • Replace the disc with a blank | |
|
| a |
|
|
|
|
|
| • There is an internal problem with the CDR 2 | • Contact an authorized Harman Kardon service depot | |
|
|
|
|