BACK FOCUS ADJUSTMENT
The back focus adjustment is located at the front of the camera and is accessible from either side of the case.
To adjust the back focus:
1.Loosen the two back focus locking screws (one on each side).
2.Turn the back focus ring:
a.Clockwise - Moves the CCD sensor assembly towards the back of the lens.
b.Counterclockwise - Moves the CCD sensor away from the lens.
3.When the back focus adjustment is satisfactory, tighten the locking screws. Do not
COUNTERCLOCKWISE
BACK FOCUS ADJUSTMENT RING
BACK FOCUS
ADJUSTMENT
LOCKING SCREW
CLOCKWISE
Figure 6. Back Focus Adjustment
Pelco Manual | [ 11 ] |
