24 Pelco Manual C543M-A (7/03)
2.2.4 Rear Panel Input/Output Cards
Pelco Part # Designations
CM9760-RPC (Rear Panel Input BNC Card for CM9760-VCC)
CM9760-DFL (Rear Panel Input Looping Downframe Card)
CM9760-DFC (Rear Panel Downframe Card, No Looping)
CM9760-RPL (Rear Panel Localized Looping Within the Same Matrix Bay)
CM9760-RPM (Rear Panel Output BNC Card for CM9760-VMC)
CM9760-RPC (Rear Panel Input BNC Card for CM9760-VCC)
What Does It Look Like?
The Rear Panel Input BNC Card is illustrated in Figure 16.
Figure 16. CM9760-RPC Rear Panel BNC Input Card
DOWNFRAME
CONNECTOR
JP1-JP16
321
UNTERMINATED
TERMINATED
16 VIDEO INPUT BNCs
What Are Its Functions?
The RPC card handles Video Input to the matrix bay. From 1 to 16 cards can oc-
cupy a single matrix bay. Each card has 16 BNC inputs. When the multiplication is
done, up to 256 Video Inputs are available on a fully populated matrix bay. Each
front loaded Video Input Card requires that a corresponding Rear Panel Input BNC
card (CM9760-RPC) be installed.
The RPC card serves several functions:
1. Physical connection point for Coax Cable.
2. The Rear Panel BNC Input Card passes the external Video signal to the Video
Input card.
3. All 16 Input Video Signals are also made available at the 16-pin connector canted
at an angle and located toward the bottom of the board (refer to Figure 16).
4. Video Input Signals can also be terminated, if applicable, with individual jumpers
accessible on the board at each of the 16 video inputs (refer to Figure 16).