Title Text
SPECTRA III
LANGUAGEENGLISH
<SYSTEM INFORMATION> <DISPLAY SETUP>
<DOME SETTINGS> ACK ALERT
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM
EXIT
DOME SETTINGS
<CAMERA>
<MOTION> <POWER UP> <LINE SYNC> <PRESETS> <PATTERNS> <ZONES>
<TITLE TEXT> <ALERT>* <CLEAR> <PASSWORD>
BACK
EXIT
TITLE TEXT
ENABLE TITLE TEXT <EDIT TITLE TEXT>
BACK
EXIT
*This setting only applies to Pressurized Spectra III dome systems with software version 1.25 or higher.
Title text is the label used to identify the camera viewed on the monitor. Up to 20 characters can be used for a title.
To edit the title text label, do the following:
1.Use the joystick to position the cursor beside EDIT TITLE TEXT.
2.Press Iris Open. The following appears on the monitor:
EDIT TEXT
1234567890OK
ABCDEFGHIJCANCEL KLMNOPQRST
abcdefghijBACKSPACE klmnopqrst
uvwxyz#&:*
3.Use the joystick to position the cursor beside a character. Press Iris Open to select the character. To clear a character, position the cursor beside BACKSPACE and then press Iris Open.
4.When the title is completed, move the cursor to OK. Press Iris Open to return to the Title Text menu.
5.Enable the title text label by doing the following:
a.Move the cursor beside ENABLE TITLE TEXT.
b.Press Iris Open. The cursor moves to the right.
c.Move the joystick up or down to view the selections. Select ON and then press Iris Open to enable the title text.
Quick Programming Guide
(See page 11)
31 |
