6C1475M-B (8/05)
2. Attach the conduit fitting, safety chain bracket, and lock nut. Install a safety chain/cable (not supplied) that will support up to 16 pounds
(7.3 kg). Install one end of the safety chain/cable to the safety chain bracket and the other end to a support structure in the ceiling.
3. Prepare the wiring for camera and lens power; refer to Table A and Table B for wiring distances. Pull wiring into the back box through the
conduit fitting.
4. Compress the spring clips on the back box and push it through the hole until the clips spring back. Tighten the screws until you hear a
clicking noise.
Figure 2. Installing the Back Box
CEILING
ATTACH SAFETY CHAIN HERE
CEILING