Pelco DX9100 installation manual Rear Mounting Rail Screws

To install the unit into an equipment rack:

1.Attach the two brackets to both sides of the unit.

2.Attach the mounting rails to the equipment rack.

3.Place the unit onto the mounting rails. It should slide in and out of the rack easily.

4.Fasten the rack ears to the equipment rack.

REAR MOUNTING RAIL	(8) SCREWS,
	10-3 2X .375-INCH,
	FLAT HEAD
	(6) SCREWS,
FRONT MOUNTING RAIL	8-3 2X .375-INCH,
	PAN HEAD WITH
	WASHERS
RACK

(4) SCREWS,

10-32 X.375-INCH FLATHEAD

RECORDER/VIEWSTATION	BRACKET
	(SIDE VIEW)
	(6) SCREWS, 8-32X.250-INCH
	PANHEAD
(4) SCREWS,	RACK EAR
10-3 2X .750-INCH
PHILLIPS, PANHEAD
WITH WASHERS

SLOTTED HOLES	TAPERED ENDS
TOWARDS FRONT
	TOWARDS REAR
OF UNIT
	OF UNIT

Figure 6. DX9200 Rack Mount Installation

18 C634M-D (12/04)