Pelco DX9100 installation manual Camera Recording Properties, Camera Properties Dialog Box

CAMERA RECORDING PROPERTIES

Camera recording properties should be set by the system administrator during installation. Only system administrators and operators with a Level 1 authorization can set or change camera recording properties. To set or change camera recording properties, you must open the DX9000 Viewstation application. The System button on the main toolbar is not available to Level 2-6 operators. If you do not have access, see the system administrator.

To set or change camera recording properties:

1.Click System > Properties on the main toolbar. The following window appears.

Figure 79. Camera Properties Dialog Box

58 C634M-D (12/04)