28 C639M-A (6/04)
CONTINUOUS RECORDING SCHEDULE
1. Select the “Continuous recording” radio button. This is the default setting and should be selected already when you
select a channel. Refer to Figure 33.
2. Click Apply.
Recording is done at all times and no schedule is defined. The entire daily and weekly recording schedules are marked in light
yellow, and any previous definitions on the schedules are removed.
DAILY RECORDING SCHEDULE
To make sure there is no delay during scheduled recording, begin the recording at least five minutes before the actual
recording time. For example, schedule the recording at 7:55 a.m. instead of 8:00 a.m.
1. Select the “Daily recording schedule” radio button.
2. Click Continuous or “Event record.”
3. In the time bar, click the desired start/end times for recording, or enter the exact start/end times in the “Fine tune” fields.
4. Click Apply.
The example below shows a

Continuous

daily recording schedule from 7:05 a.m. to 12:05 p.m. The box in the time bar is blue
with a red border. You can make the box smaller or larger by dragging it with your mouse.
Figure 34. Continuous Daily Recording Schedule Page