C3433M-A (8/07) 9
SETTINGS SCREENUse the Settings screen to set the name and language of the IP camera; configure network settings; and
add, change, or delete users and roles (permissions).
GENERAL TAB
Use the General tab to change the device name to a user-friendly name. The Gerneral tab also displays the
firmware version loaded on the IP camera.
Figure 3. General Tab
Change the Device Name
The default name for the IP camera is Pelco Device. To change the device name do the following:
1. Double-click in the Device Name text box to highlight the text.
2. Type a user-friendly name into the Device Name text box (maximum 36 characters). A friendly name
makes it easier to recognize the device on the network. For example, Front Door, Lobby, or Parking Lot.
3. Click Save to save the device name, or click Cancel to revert to the previous device name.
FIRMWARE VERSION
DEVICE NAME