10 C288M-G (8/05)
Specifications MECHANICAL
Construction Cast aluminum
Finish
IWM-BK, IWM24-BK Black polyester powder coat
IWM-GY, IWM24-GY Gray polyester powder coat
Cable Entry
IWM Series Mount One 0.75-inch (1.91 cm) NPT
opening on the bottom of the
mount
IWM24 Series Mount Two cable feedthrough holes
on the mounting plate
accommodate 0.50-inch (1.27
cm) conduit fittings or PG13.5
liquid-tight gland fittings. One
0.75-inch (1.91 cm) NPT
opening on the bottom of the
mount for conduit connector.
Mount Method Secure to wall with four
fasteners of appropriate
length (fasteners not
supplied). Use fasteners up to
3/8-inch (0.95 cm) diameter.
Locking Method 6-32 Allen-head set screw to
tighten pipe
Dome Mounting Dome screws directly into
mount.
Maximum Load 75 lb (34 kg)
ELECTRICAL
IWM24 Series
Input Power Switchable 120/240 VAC, 50/
60 Hz via an internal slide
switch
Output Power 24 VAC, 100 VA transformer
Fuse One 1.6 A, 120 VAC fast-
acting fuse
One 500 mA, 240 VAC fast-
acting fuse
General
Environment Indoor/outdoor
Operating Range -50° to 120°F (-46° to 49°C)
UNIT WEIGHT
IWM Series 2.46 lb (1.12 kg)
IWM24 Series 6.58 lb (2.98 kg)
Ratings
IWM24 Series only Meets NEMA 4 and IP 56
standards
(Design and product specifications subject to change without
notice.)
Figure 4.
IWM and IWM24 Series Dimension Drawing
14.629 (37.15)
8.0
(20.32)
7.5
(19.05)
6.5
(16.51)
4.5 (11.43)
5.50 (13.97)
13.50 (34.30)