C288M-G (8/05) 7
PULL WIRING
1. Refer to Table A and B for coaxial cable requirements and 24 VAC wiring distances.
2. Pull wiring/cabling for video and power. Refer to one of the following installation methods:
METHOD 1 – THROUGH CONDUIT FITTINGS TO THE BOTTOM OF THE MOUNT
If you are pulling video and power cables from the bottom of the mount, first attach the mount. Then pull the cables through the conduit in
the bottom of the mount. Continue to pull the video cable only through the top of the mount.
METHOD 2 – THROUGH CONDUIT FITTINGS/GLANDS TO THE BACK OF THE MOUNT
If you are pulling video and power cables through the back of the mounting plate, pull the cables through the glands or conduit under the
transformer. Continue to pull the video cable only through the top of the mount. Attach the mount.
ATTACH THE MOUNT TO THE SURFACE
1. Attach the mount to the mounting surface with fasteners of an appropriate length with a maximum diameter of 3/8-inch (0.95 cm)
(fasteners are not supplied). When installing the mount to a wall outdoors, seal the bolt holes with an appropriate sealant. Apply the
sealant around the bolt holes between the mount and the wall.
2. Tighten the fasteners enough to seal the gasket attached to the back of the mounting plate and create a waterproof seal.
CONNECT INPUT POWER
1. Connect the power to the transformer.
a. Connect the AC High (hot) wire to the clamp on the black transformer wire. The AC High wire is labeled AC HI [HOT].
b. Connect the AC Low (neutral) wire to the clamp on the white transformer wire. The AC Low wire is labeled AC LOW [NEUT].
2. Connect the input ground wire to the green and yellow striped wire that is attached to the mount.
Figure 3.
IWM24 Wiring Diagram
1a
1
1b
2a
2
2b
SW03-2211-0500
FS02-0301-1103
BRN
BLK
120/230 VAC INPUT
AC HIGH
(HOT)
AC LOW
(NEUT)
WHT
SPLICE
XF02-0604-0001
(TO DOME)
24 VAC 100 VA OUTPUT
YEL BRN
RED
ORG
YEL
BLU
BLU
GRN/YEL
WIRING DIAGRAM COLOR KEY
COLOR DESCRIPTION
BLK BLACK,SOLID
WHT WHITE,SOLID
BLU BLUE,SOLID
BRN BROWN,SOLID
ORG ORANGE,SOLID
RED RED,SOLID
YEL YELLOW,SOLID
GRN/YEL GREEN & YELLOW, STRIPED