Pelco MPS524DT/220 operation manual Dimension Drawing, Pelco Manual C545M-E2/02, General

Power Cord:	Unit is supplied with grounded power cord (either U. S. Standard
	or Continental European Standard)
Output Connector:	AMP CPC type, 14 pin (mate supplied)
Cable Requirements:	4 conductors for PS7/PS30 models and 6 for PS20/PS20-24 models
Operating Distances:	The following are the recommended cable distances between the
	control and the listed scanners. The PS20 and PS20-24 are pow-
	ered locally and do not use power from the controller.
		20 AWG	18 AWG	16 AWG
		(0.5 mm2)	(1.0 mm2)	(1.5 mm2)
	PS7-24	745 ft	1185 ft	1885 ft
		(227 m)	(361 m)	(575 m)
	PS30A	2265 ft	3605 ft	5720 ft
		(690 m)	(1098 m)	(1743 m)
	PS30-24	115 ft	185 ft	295 ft
		(35 m)	(56 m)	(90 m)
	PS20	2,300 ft	3,700 ft	5,900 ft
		(701 m)	(1,127 m)	(1,798 m)
	PS20-24	5,600 ft	9,000 ft	14,300 ft
		(1,706 m)	(2,743 m)	(4,368 m)
	NOTE: A relay box can be used to extend the maximum operating
	distance (control to relay box) to 13,000 feet using 16 AWG.
GENERAL
Construction
Cover:	Steel, black polyester powder coat
Chassis:	Steel, zinc plated
Panel:	Aluminum, black polyester powder coat with white silkscreen
Unit Size:	5.50 (W) x 1.75 (H) x 8.90 (D) inches (13.97 x 4.45 x 22.61 cm)
	Refer to Figure 2.
Unit Weight
MPS5DT:	3 lb (1.36 kg)
MPS524DT:	4 lb (1.80 kg)
MPS524DT/220:	4 lb (1.80 kg)

(Design and specifications are subject to change without notice.)

Figure 2. Dimension Drawing

Pelco Manual C545M-E (2/02) 7