Pelco Manual C1970M-A (7/01) 13

Figure 9. Monitor Controls

Table G. Front Panel Reference Key

Reference
Number Description Function
1Reset/ALT key Resets alarm or video loss detection. When there is no alarm, use as ALT key to
activate the alternate functions of the Zoom, PIP, Quad, CH4, and Talk keys.
2 Zoom/Freeze key Toggles zoom mode when viewing single camera. In single-camera mode,
freezes display when pressed while the ALT key is held in. In multiple-camera
modes, freezes selected display when pressed while the ALT key is held in
and then a channel key is pressed.
3PIP/Sequence key In display mode, shows picture-in picture view. Continuous pressing rotates the full-
screen view. If pressed while the ALT key is held in, starts sequential viewingmode.
4Quad/Menu key In display mode, shows quad view. If pressed while the ALT key is held in,
enters menu/setup mode.
5Power Indicator LED Illuminates when monitor power is on.
6 CH1/UP key In display mode, shows full view of channel 1. In menu mode, moves cursor up
or toggles setting.
7CH2/Down key In display mode, shows full view of channel 2. In menu mode, moves cursor
down or toggles setting.
8CH3/Left key In display mode, shows full view of channel 3. In menu mode, moves cursor left
or toggles setting.
9 CH4/Right key/VCR In display mode, shows full view of channel 4. In menu mode, moves cursor right
or toggles setting. If pressed while the ALT key is held in, display switches to the
VCR playback mode.
10 Talk/Audio Press to talk switch to activate microphone. Press and hold to talk. Release to
listen. If pressed while the ALT key is held in, moves audio connection to the
next channel.
11 Microphone Speak in microphone to talk to people at camera locations.
12 Tint Adjusts display color phase/flesh tones.
13 Sharpness Adjusts display sharpness level.
14 Color Adjusts display color saturation level.
15 Brightness Adjusts display brightness.
16 Contrast Adjusts display contrast.
17 Volume Adjusts loudness of the speaker (effective only when cameras are equipped with
the audio option or when playing back recorded sound from a VCR).
18 Power button Controls power to monitor only. Power to the cameras and quad circuitry is
controlled only with the switch on the back of the monitor.
CH4
VCR
CH3
ZOOM
FREEZE
CH2CH1 MIC
TINT SHARP COLOR BRIGHT CONTRAST VOLUME POWER
PIP
SEQ QUAD
MENU
RESET
ALT
TALK
AUDIO
1 2 3 4 56 7 8 9 10 11 12 13 14 15 16 17 18