Pelco Manual C1970M-A (7/01) 3
IMPORTANT SAFEGUARDS AND WARNINGS
Prior to installation and use of this product, the following WARNINGS should be observed.
1. Installation and servicing should only be done by qualified service personnel and
conform to all local codes.
2. Unless the unit is specifically marked as a NEMA Type 3, 3R, 3S, 4, 4X ,6 or 6P
enclosure, it is designed for indoor use only and it must not be installed where
exposed to rain and moisture.
3. Only use replacement parts recommended by Pelco.
4. When used with the CCQ1400A-4 camera with audio, the PCMQ14A Color Quad
Monitor is capable of being used as a two-way intercom system. Applications other
than the intended use as a two-way intercom communications system may violate
Federal wiretapping laws. No systems may be used to monitor audio without the
expressed knowledge of the parties being monitored. A warning notice

must

be
posted and plainly visible at all entrances to public and private premises utilizing the
PMCQ14A/CCQ1400A-4 intercom system. Pelco assumes no liability for equipment
being used for purposes other than the intended use as a two-way intercom system.
5. Do not attempt to disassemble the unit.
6. Do not remove screws or cover.
7. There are no user-serviceable parts inside.
8. Allow adequate air circulation to prevent internal heat build-up. Do not place the unit
on or near materials that may hinder air circulation.
9. Do not install any of the system parts where they will be exposed to water, excessive
dust or excessive vibration.
The product and/or manual may bear the following marks:
Please thoroughly familiarize yourself with the information in this manual prior to installation
and operation.
This symbol indicates that
dangerous voltage constituting a
risk of electric shock is present
within this unit.
This symbol indicates that there
are important operating and
maintenance instructions in the
literature accompanying this unit.
CAUTION:
RISK OF ELECTRIC SHOCK.
DO NOT OPEN.