Pelco Manual C1996M (2/01) [ 3 ]
RMQ17T
The RMQ17T Rack Mount Kit contains the following parts:
Qty Description
2Monitor mounting brackets
2Handles
8Nylon finishing washers (black)
8 Screws, 10-32 x .75-inch Phillips, pan head (black)
4Screws, 10-32 x .50-inch Phillips, pan head
4Locking washers
To rack mount the PMCS17A monitor, refer to Figure 1 and do the following:
1. Disconnect the monitor from its power supply.
2. Attach the handles to the mounting brackets. Use the four supplied 10-32 x .50-inch screws and lock-
ing washers.
3. Remove the three screws from the left side of the monitor and the three screws from the right side.
4. Attach the monitor mounting brackets to the monitor using the monitor screws removed in step 3.
5. Use the eight supplied 10-32 x .75-inch black screws and finishing washers and mount the monitor
assembly to a 19-inch (48.26 cm) rack or console. Installation of the monitor assembly may require
two persons.
6. Reconnect the monitor to its power supply.
HANDLE
MOUNTING BRACKET
00422
Figure 1. RMQ14T/RMQ17T Rack Mount Kit Installation