|
|
INPUT POWER: | 12 Volts DC, 10 Amps DC |
SIREN MODE |
|
OUTPUT POWER: | 90 Watts RMS with 12 VDC input, 4K Ohm LOAD |
AUDIO MODE |
|
OUTPUT POWER: | 40 Watts RMS with 12 VDC input, 4K Ohm LOAD |
SIREN |
|
FREQUENCY: | 660Hz - 1325Hz Nominal |
CYCLE RATES: | WAIL - 14 cycles/min |
| YELP - 190 cycles/min |
AUDIO | PHASER - 15 cycles/sec |
| |
RESPONSE: | 200Hz - 10KHz |
| Harmonic Distortion Less than 3% @ 1KHz |
RADIO INPUT |
|
SENSITIVITY: | 0.75VAC Input Min. for 40 Watts RMS Output |
OPERATING |
|
TEMPERATURE: | |
SIZE: | |
WEIGHT: | 4 pounds |
NIGHT VISIBILITY: | Backlit front control panel when power is on |
PROTECTION: | High Voltage – Siren output stops with input voltage above 16VDC |
| Stops high output power from blowing speaker |
| Reverse Polarity - Fuse blows when power is wired backwards |
| Shorted Output – Fuse blows if speaker shorts (a common problem) |
CAUTION: | THIS SIREN PRODUCES A VERY HIGH VOLTAGE OUTPUT OF 600V RMS. DO NOT USE THIS |
| AMPLIFIER WITH NORMAL EMERGENCY VEHICLE SPEAKERS. |
NOTICE
Due to continuous product improvements, we must reserve the right to change any specifications and information, contained in this manual at any time without notice.
Carson Manufacturing Co., Inc. makes no warranty of any kind with regard to this manual, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose.
Carson Manufacturing Co., Inc. shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this manual.
TB0348A | Page 2 of 7 | 07/12/05 |