36 Pelco Manual C650M (12/98)

9.0 PLAYBACK

9.1 PLAYBACK PROCEDURE

Figure 21. Playback Controls

REW FF
JOG/ADJUST
CLEAR/ ENTER/
SHUTTLE
REC
STOP
PLAY
POWER
EJECT
PICTURE
TRACKING
POSITION/
VERTICAL
ADJUST
REC/PLAY
MODE
COUNTER
RESET
COUNTER MEMORY/
SKIP/INDEX
PAUAE
SHUTTLE HOLD
DISPLAY
TIMER REC
VIDEO
SOFT SHARP
COLORB/W
1. Load a pre-recorded tape. (If the erasure prevention tab
has been removed, the VCR automatically begins play-
back mode.)
2. Press the REC/PLAY MODE (+) or (-) buttons to select
the desired playback mode.
A tape recorded in 2H, L12H, or L24H mode cannot
be played back in 6H mode.
A tape recorded in 6H mode cannot be played back
in 2H, L12H, 12H, L24H, or 24H mode.
3. Set the VIDEO switch to either COLOR or B/W.
4. Press the PLAY button to start playback.
5. Press the STOP button to halt playback.
Turn the SHUTTLE ring to the left to rewind the tape
when the VCR is in stop mode.
Turn the SHUTTLE ring to the right to fast forward
the tape when the VCR is in stop mode.

9.1.1 Playback Mode

When you press the REC/PLAY MODE button, playback mode is switched in
the following order: 2H, L12H, 12H, L24H, 24H, 2H.
If the recording is in 6H mode, playback mode is not switched even when you
press the REC/PLAY MODE button.