SabreLiteTM 2020
Recoil LEDTM
OPERATING INSTRUCTIONS CATALOG #2020
BATTERY INSTALLATION
1.Remove lens housing by turning
2.Remove the LED module.
3.Remove the battery tray.
4.Remove used batteries and replace with fresh batteries in the tray as shown by the polarity icons molded into the base of the tray battery.
5.Insert the battery tray into the flashlight with the two metal tabs facing outwards.
6.Replace the LED module.
7.Replace lens housing squarely on threads and turn clockwise while pressing on the lens housing slightly.
ON/OFF
Turn the lens housing clockwise until light activates.
To turn light off, back lens housing off
DO NOT OVERTIGHTEN.
O-RING MAINTENANCE
Check closely for cuts, scratches, or otherwise damaged
PRODUCT SPECIFICATIONS
Lamp Type: | LED |
Battery Type: | E93 1.5V Alkaline |
Battery Brand: | Eveready® Energizer® |
REPLACEMENT PARTS
2001
Battery Safety Bulletin Alakline Batteries
1.Hazardous location safety approvals for explosive environ- ments are only valid for the specified cell type manufacturer and, where applicable, brand names that are displayed on the flashlight and/or instructions sheets that are supplied with the light.
2.The use of other battery technologies may reduce the performance of the the flashlight. Always read the battery manufacturers recommendations for the appropriate use of the battery technology/brand prior to using them in the flashlight.
3.When replacing the batteries:
a.Replace all the batteries at the same time.
b.Do not mix battery brands and old and new batteries.
c.Always insert batteries correctly with regard to polarity (+ and
4.Do not change batteries in a hazardous location.
5.Remove batteries from equipment if it is not to be used for an extended period of time.
CAUTION: Read This Notice Before Use.
Pelican Products assumes no liability for any brand batteries which are defective or cause injury to anyone when used in any Pelican flashlight.
DO NOT MODIFY THIS PRODUCT!
PELICAN LEGENDARY FULL LIFETIME GUARANTEE OF EXCELLENCE
Pelican Products, Inc. guarantees its lights for a lifetime against breakage or defects in workmanship. This guarantee does not cover the lamp or batteries (rechargeable or alkaline).
Pelican will either repair or replace any defective product, at our sole option. THE REMEDIES HEREBY PROVIDED SHALL BE THE EXCLUSIVE AND SOLE REMEDY OF THE PURCHASER. TO THE EXTENT PERMITTED BY LAW, IN NO EVENT SHALL PELICAN BE LIABLE FOR ANY INDIRECT, PUNITIVE, INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR SPECIAL DAMAGES, REGARDLESS OF WHETHER A CLAIM FOR SUCH DAMAGES IS BASED ON WARRANTY, CONTRACT, NEGLIGENCE OR OTHERWISE. In no event shall Pelican’s liability to the purchaser for damages hereunder exceed the pur- chase price of the product in respect of which damages are claimed.
To make a warranty claim, the purchaser must contact Pelican Products, Inc. at 23215 Early Avenue, Torrance, CA 90505 or sales@pelican.com. Any warranty claims shall be made by the purchaser as soon as practicable. The purchaser must obtain a return authorization number from Pelican Customer Service prior to returning any product. In the event that Pelican determines that any returned product is not defective, within the terms of this warranty, the purchaser shall pay Pelican all costs of handling, transportation and repairs at Pelican’s prevailing rates.
All warranty claims of any nature are barred if the flashlight
has been altered, damaged or in any way physically changed, or subjected to abuse, misuse, negligence or accident.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may have other rights which vary from state to state.
Lifetime Guarantee does not cover Roto Molded or AALG products.
Refer to www.pelican.com/warranty for full details.
SabreLiteTM 2020
Recoil LEDTM
INSTRUCCIONES DE FUNCIONAMIENTO #CAT. 2020
INSTALACIÓN DE LAS PILAS
1.Retire el bastidor de lente girándolo en sentido contrario a las agujas del reloj.
2.Retire el módule de LED.
3.Retire la bandeja de pilas.
4.Retire las pilas usadas y coloque las pilas nuevas en la bandeja teniendo en cuenta la polaridad como se muestra en la ilustración impresa en la base de la bandeja.
5.Inserte la bandeja de pilas en la linterna con las dos piezas metálicas apuntando hacia afuera.
6.Vuelva a colocar el módule de LED.
7.Vuelva a colocar el bastidor de la lente sobre la rosca y gire en el sentido de las agujas del reloj al mismo tiempo que ejerce un poco de presión sobre el mismo.
ENCENDIDO / APAGADO
La luz se enciende girando el bastidor de el lente en el sentido de las agujas del reloj. Para apagarla, gire en sentido opuesto hasta que se apague la luz. Siga girando aproximadamente una vuelta completa para eliminar la posibilidad de que la
luz se encienda por error al estar guardada. NO APRIETE DEMASIADO.
MANTENIMIENTO DE LA JUNTA TÓRICA
Inspeccione atentamente la junta tórica y la superficie del labio de contacto de el lente en busca de cortes, arañazos u otro tipo de daños. Limpie cualquier suciedad o cuerpo extraño de las superficies de contacto de la junta tórica. Mantenga las roscas, la ranura de la junta tórica y el labio interior de el lente lubricados con grasa de silicona. Consulte en la Garantía la información sobre sustitución de la junta tórica.
PELICANTM PRODUCTS
23215 Early Avenue • Torrance, California 90505 USA Tel 310.326.4700 • FAX 310.326.3311 • www.pelican.com
PELICANTM CANADA
Tel 780.481.6076 • FAX 780.481.9586
PELITM PRODUCTS, S.L.U.
c/ Provença, 388, 7º • 08025 · Barcelona, Spain Tel: +34 934 674 999 • Fax: +34 934 877 393
Product of the USA. Assembled in the US with US and foreign components
All trademarks are registered and/or unregistered trademarks of
Pelican Products, Inc., its subsidiaries and/or affiliates.
Energizer is a registered trademark of Eveready Battery Company, Inc.
PELICANTM
SabreLiteTM 2020
Recoil LEDTM
OPERATING INSTRUCTIONS
CATALOG #2020
23215 Early Ave. • Torrance, CA 90505
(310)
