Trouble Shooting For
Race N Play Wireless Controller
If you are having difficulties with your new Race N Play Wireless Controller please refer below:
The Vibration function is not working on my new Race N Play Wireless controller.
1.Race N Play Wireless does not support Vibration because the controller is very compact, eliminating the bulk common to other wireless controllers and was designed for maximum battery life.
My system turns on but I don’t see anything on the TV.
1.Check to verify that your A/V cable is properly connected to your system.
2.Check to verify that your A/V cable is properly plugged into your television set.
My Race N Play Wireless does not respond.
1.Check to verify your Race N Play Receiver unit is firmly and properly plugged into controller port one, or port two if it is for a second player.
2.Check to verify that your batteries are inserted
correctly. Make sure both batteries are inserted. Please refer to page 9 for more details on inserting the batteries.
3.Check to verify that the Race N Play Wireless and the Receiver Unit are on the same channel / frequency. Please refer to page 8 for more details.
4.If the game only functions in Analog Mode, press the ana- log button until the Mode LED on the Receiver turns red.
5.Unplug the Receiver Unit and reconnect it if you are still experiencing problems. This will reset the connection between the Chameleon Wireless and the Receiver.
15.
