Operating Instructions
What to do if...
Trouble Shooting
If the appliance is not working correctly, please carry out the following checks before contacting your local Service Force Centre. Important: If you call out an engineer to a fault listed below or to repair a fault caused by incorrect use or installation, a charge will be made even if the appliance is in guarantee.
• If the fault code C1 oder C2 is shown in the
low).
After clearing the fault, press the START/PAUSE button. If the fault code is shown again, contact your local Service Force Centre.
•For all other faults displayed in the
Problem | Possible Cause | Remedy | |
| The mains plug is not in- | Insert the mains plug. | |
| serted. | ||
|
| ||
| The house fuse has blown. | Replace the fuse. | |
The washing machine | The door is not closed prop- | Close the door - there should | |
does not work. | |||
erly. | be an audible click. | ||
| |||
| The START/PAUSE button | Press and hold the START/ | |
| was not pressed for long | PAUSE button until the pro- | |
| enough. | gramme starts. | |
The door cannot be | The child safety device is | Release the child safety fea- | |
ture (see section "Child | |||
closed. | switched on. | ||
safety feature"). | |||
|
| ||
| The water tap is closed. | Open the water tap. | |
| The filter in the socket of the | Close the water tap. Discon- | |
Water is not entering. | nect the hose from the water | ||
inlet hose connection is | tap, remove the filter and | ||
Fault code (1 appears. | blocked. | ||
clean under running water. | |||
|
| ||
| Water tap is blocked with | Check the water tap and | |
| limescale or is faulty. | have it repaired if necessary. | |
|
|
|
34
