Operating Instructions
Problem | Possible Cause | Remedy | |
The drain pump runs |
| Close the water tap, remove | |
constantly, even when | The Aqua Control | the mains plug and inform | |
the machine is | system has been activated. | your local Service Force Cen- | |
switched off. |
| tre. | |
Fabric softener was | The insert in the compart- | Clean the detergent | |
not rinsed in, the æ | ment for conditioners is not | dispenser drawer and attach | |
compartment is filled | correctly attached or is | the conditioner insert cor- | |
with water. | blocked. | rectly. | |
|
| Pay attention to the maxi- | |
|
| mum load quantity (see the | |
The washing is heavily | Probably too much washing | Programme Tables). In the | |
creased. | has been put in the drum. | case of | |
|
| lect the EASY IRON pro- | |
|
| gramme. | |
| The drain hose is kinked. | Remove the kink. | |
| The maximum pump height | Contact your local Service | |
| Force Centre. For pumping | ||
| (outlet height 1m from the | ||
Washing is not spun | heights over 1 m a conver- | ||
base surface of the appli- | |||
thoroughly and water | sion kit is available as a spe- | ||
ance) is exceeded. | |||
remains visible in the | cial accessory. | ||
| |||
drum. |
|
| |
| Switch off the machine and | ||
Fault code (2 appears. |
| ||
The drain pump is blocked. | disconnect the mains plug. | ||
|
| Clean the drain pump. | |
| For siphon attachments: the | Clean the siphon. | |
| siphon is clogged | ||
|
| ||
| The door is locked for safety | Wait until DOOR indicator | |
| reasons (the DOOR indicator | ||
| is lit green. | ||
| is not lit). | ||
The door cannot be |
| ||
|
| ||
opened when the | The Programme Protection is | Release the Programme Pro- | |
washing machine is | tection (see "Programme | ||
switched off. | set. | Protection"). | |
| |||
| The washing machine is in | Press the DOOR button | |
| again. | ||
|
|
|
36
