Electrolux 88840 manual Machine is not level

		Operating Instructions
Problem	Possible Cause	Remedy
		Remove the transit packag-
	The transit packaging has not	ing as described in the In-
	been removed.	stallation and Connection
		instructions.
		Adjust the feet according to
	The machine is not level.	the Installation and Connec-
The washing machine		tion instructions.
	There is very little washing in
vibrates when operat-		This does not affect the op-
ing or is noisy.	the drum (for example, one
		eration of the machine.
	dressing gown).
	Water could not be fully	Check the drain hose and re-
		move any kink if necessary or
	drained out before spinning,
		clean the water pump and if
	because the
		necessary remove foreign
	drain hose is kinked or the
		bodies from the pump hous-
	water pump is blocked.
		ing.
		It may be necessary to re-
Excessive foaming dur-	Probably too much detergent	duce the amount of deter-
		gent used. Follow the
ing the main wash.	has been used.	manufacturer's recommen-
		dations.
	The screw connection on the	Tighten the inlet hose screw
	inlet hose is leaking.	connection.
	The drainage hose is leaking.	Check the drainage hose and
		replace if necessary.
	The drain pump cover is not	Close the cover correctly.
	correctly closed.
Water leaks out of the		Stop the programme and re-
	Washing is caught in the	move the washing caught in
washing machine.
	door.	the door. Restart the pro-
		gramme.
		Close the emergency empty-
	The emergency emptying	ing hose (see Section “Carry
		out emergency emptying”).
	hose is not correctly closed
		Call your local Service Force
	or is leaking.
		Centre, if the emergency
		emptying hose is leaking.

35