Interior Seal | Pella 80GZ0102

7INTERIOR SEAL

Caution: Ensure use of low pressure polyurethane window and door insulating foams and strictly follow the foam manufacturer’s recommendations for application. Use of high pressure foams or improper application of the foam may cause the window frame to bow and hinder operation.

A. Apply insulating foam sealant. &ROM THE INTERIORINSERTTTHETNOZZLE OF THE APPLICATORPAPPROXIMATELY EDEEP INTOTHEDSPACEPBETWEENETHEH WINDOWWANDATHEDROUGH OPENING AND APPLY A ADEEP BEADPOF FOAM 4HIS WILL ALLOWWROOMOFOR EXPANSIONEOF THE FOAMIANDNWILL MINIMIZEE SQUEEZEEOUT )FFUSINGSFOAM OTHER THANM'REATA3TUFF 7INDOWW

and Door Insulating Foam Sealant by the Dow Chemical	"
Company, allow the foam to cure completely	"
USUALLY TOL HOURS TBEFOREEPROCEEDING TOI
the next step.

Note: DO NOT completely ﬁll the space from the back of the ﬁn to the interior face of the opening.

8SEALING THE WINDOW TO THE EXTERIOR WALL CLADDING

When applying siding, brick veneer or other exterior ﬁnish material, leave adequate space between the window frame and the material for sealant. Refer to the illustration that corresponds to your ﬁnish material.

Note: The sealant details shown are standard recommendations from the sealant industry. Contact your sealant supplier for recommendations and instructions for these and any other applications.

#3*$,7&/&&3

*OTVMBUJOH

GPBN

.JO

#BDLFS3PEBOE

4FBMBOUUZQJDBM

$MFBSBODF "DDFTTPSZ(SPPWF