EPSON Stylus COLOR 400

hw_pig.fm5 (Left) 1/2/97 10:34am

2.Fan a stack of paper and then even the edges.

3.Load the stack with the printable side up and the short edge first. (Load pre-printed forms and letterhead top edge first.) Place the paper’s right edge against the right edge guide.

arrow mark

Note:

Don’t load paper above the arrow mark inside the left edge guide.

4. Slide the left edge guide back against the stack of paper.

5.Select the Media Type and other printer driver settings that are appropriate for the media you loaded.

Loading Special Media

When loading special media, use the same steps described in the previous section, but keep the following guidelines in mind.

EPSON 360 dpi, High Quality, and Photo Quality Ink Jet Paper

You can load paper up to the arrow mark on the left edge guide. If you use legal-size ink jet paper, don’t load it more than half way to the arrow mark.

Note:

Some special media have a cut corner that you need to position correctly; follow any instructions in the package. Always handle the sheets by the edges, and don’t touch the printable surface.

EPSON Photo Quality Glossy Paper, Glossy Film, and Transparencies

Before loading transparencies, reposition the paper support as shown on page 9. For media or transparencies, put a support sheet (packed with the media) or a plain paper sheet beneath the stack.

Caution:

Don’t use the cleaning sheets that may be included with your special media; they may cause a paper jam.

You can load up to 20 sheets of glossy paper or up to 30 sheets of glossy film or transparencies. If you load multiple sheets of glossy film, the minimum top margin you can use is 1.2 inches (30 mm). For best results, or to print with a smaller top margin, load and print glossy film one sheet at a time.

Remove each sheet from the output tray immediately after it is printed and make sure each sheet is dry before stacking it.

Note:

Use ink jet papers within one year of purchase. Use glossy media and transparencies within six months. Store unused media in its original package and keep it away from high heat and humidity.

10 - EPSON Stylus COLOR 400

1/97