EPSON Stylus COLOR 400
hw_pig.fm5 (Left) 1/2/97 10:34am
❏Select EPSON Ink Jet Transparencies for great printouts of overhead transparencies at the Normal - 360 dpi print quality setting.
❏Choose EPSON❏Use EPSON Photo Quality Self Adhesive Sheets to create great quality labels at the Fine - 720 dpi print quality setting.
Replacing an Ink Cartridge
If a B black or A color ink out light flashes, the indicated cartridge is low on ink. If the light stays on, the cartridge is empty and you need to replace it.
Caution:
To ensure good results, use genuine EPSON cartridges and do not refill them. Other products may cause damage to your printer not covered by EPSON's warranty.
Use these EPSON ink cartridges within six months of installing them and before the expiration date on the package:
| Black ink cartridge | S020093 |
| Color ink cartridge | S020089. |
1.Make sure the printer is on and not printing, and that either the B black or A color ink out light is flashing or on.
2.Lower the output tray and then raise the printer cover.Caution:
For best results, don’t replace an ink cartridge unless its ink out light is flashing or on.
If ink runs out, you can’t continue printing, even if ink remains in the other cartridge.
If you press the R cleaning button when no ink out light is flashing or on, the printer cleans the print heads, as described on page 11.
3.Press the R cleaning button and hold it for three seconds.If you have to replace an ink cartridge before its ink out light flashes or comes on (if the cartridge is too old, for instance), press the E load/eject button and hold it for three seconds instead of the R cleaning button.
The print heads move slightly left to the ink cartridge install position and the Ppower light begins flashing. (The print heads return to their home position if you don’t proceed to step 4 within 60 seconds.)
4.Pull up the ink cartridge clamp only for the cartridge you want to replace. The cartridge rises up from its holder.
ink cartridge clamp
5.Lift the cartridge out of the printer and dispose of it carefully.Warning:
If ink gets on your hands, wash them thoroughly with soap and water. If ink gets into your eyes, flush them immediately with water.
6.Remove the new ink cartridge from its packaging. Then remove only the disposable yellow portion of the tape seal as shown here.
black cartridge | color cartridge |
Caution:
You must remove the tape seal from the top of the cartridge; leaving the tape on will permanently damage it. Do not remove the clear seal from the bottom of the cartridge; ink will leak out.
| 8 - EPSON Stylus COLOR 400 | 1/97 |