Pelonis 400 Loading Plain Paper, Press the, 8. Press down the ink cartridge clamp until it locks in place

1/2/97 10:34am (Right) hw_pig.fm5

EPSON Stylus COLOR 400

7.Lower the ink cartridge into its holder with the label facing up and the arrow pointing to the back of the printer. The color cartridge goes on the right and the black cartridge goes on the left.

8. Press down the ink cartridge clamp until it locks in place.

Caution:

Don’t open the clamp or remove a cartridge except to replace it with a new one. Once you remove a cartridge, you can’t reuse it, even if it contains ink.

9.Press the R cleaning (or E load/eject) button to begin charging. (Even if you don’t press a button, ink charging begins 60 seconds after you close the clamp.)

10.The Ppower light continues to flash while the ink charges. When charging is finished, the Ppower light stops flashing and the print heads move to the far right position. Close the printer cover and resume printing.

Caution:

Never turn off the printer while the Ppower light is flashing.

Loading Plain Paper

Always load paper or other media with the printable side facing up. Look for an arrow on the paper packaging to indicate the printable side.

1.Lower the output tray and slide out the extension. Then slide the left edge guide all the way left.

To load long paper, pull out the paper support extension and both output tray extensions.

To print on transparencies, remove the paper support and reinstall it in the rear paper support slot.

1/97 EPSON Stylus COLOR 400 - 9