Pelonis FS40-G5 Operating Instructions, Additional Features, Troubleshooting, Specifications

OPERATING INSTRUCTIONS

MANUAL CONTROL OPERATION

To operate the fan manually, use the buttons on the Fan Control Panel (first, make sure the Remote Control is detached from the Fan Control Panel to access the buttons).

ON/SPEED/OFF button:

Press the ON/SPEED/OFF button to turn the fan ON, to change the speed from Low (L), Medium (M), or High (H), or to turn it OFF.

TIMER button:	Fan Control Panel
Press the Timer button until the desired time of 1,2, or 4 hours is

selected. The fan will operate for the desired length of time chosen and then will shut off automatically. To turn the Timer OFF, press the button until all of the timer lights are off.

REMOTE CONTROL OPERATION

The Remote Control can be conveniently stored over the two plastic pins on the Fan Control Panel. If the Remote was originally attached to the Fan Control Panel when the product was first purchased, remove it by lifting it so that it detaches from the two plastic pins.

INSTALLING BATTERIES FOR THE REMOTE

1.Press down on the battery compartment cover and slide it out.

2.Insert the batteries (not included), making sure that the positive terminals are facing the proper way. (Note: use size “AAA”manganese or alkaline batteries. Do not use rechargeable batteries).

3.Replace the cover.

ON/OFF button:

Press the ON/OFF button to turn the fan ON or OFF.

SPEED button:

Press the SPEED button to change the fan speed from LOW

(L), MEDIUM (M), or HIGH (H).

TIMER button:

(operates the same as the TIMER button function for Manual Control Operation above).

Using the Remote Control Plastic Pin

Point the remote control at the receptor located on the fan control panel and press the desired button. The remote control will work at an angle of about 60 degrees between right and left from the receptor. The batteries must be removed from the remote control before they are scrapped and safely disposed of.

ADJUSTING THE FAN HEIGHT

Turn the Height Adjustment Ring on the fan column counter clockwise. Lift or lower the fan column to the desired height and turn the Height Adjustment Ring clockwise to secure tightly in place.

ADJUSTING THE WIND DIRECTION

Push the grills slightly up or down to the desired direction.

ADDITIONAL FEATURES

This fan has additional features:

∙Thermal Fuse – turns the fan off if it overheats.

∙Convenient Carry Handle – allows for easy transport from room to room.

TROUBLESHOOTING

If your fan fails to operate, please follow these instructions:

∙Be sure the fan is plugged in and that the electrical outlet is working properly.

∙Check for any obstruction. If you find any obstruction, turn the fan “OFF”. Unplug the fan and carefully remove the obstruction. Plug the fan in and turn it on again by referring to the OPERATING INSTRUCTIONS.

NOTE: IF YOU EXPERIENCE A PROBLEM WITH YOUR FAN, PLEASE SEE THE WARRANTY INFORMATION FOR INSTRUCTIONS. PLEASE DO NOT ATTEMPT TO OPEN OR REPAIR THE FAN YOURSELF. DOING SO MAY VOID THE WARRANTY AND COULD CAUSE DAMAGE OR PERSONAL INJURY. IF THE PROBLEM STILL PERSISTS, PLEASE CONTACT US BY REFERRING TO THE SERVICE & SUPPORT INFORMATION ON THE FOLLOWING PAGE.

CLEANING AND STORAGE

It is recommended that the fan be cleaned at least one time during the operating season in order to provide the optimum level of performance. ALWAYS TURN THE POWER OFF AND UNPLUG THE FAN BEFORE CLEANING. Be sure to save the box for off-season storage.

∙Turn the fan “OFF” and unplug it.

∙Clean the plastic parts with mild soap and a damp cloth.

∙Do not use any cleaning agents or detergents.

∙Never immerse the fan in water.

∙To dismantle the fan, reverse the assembly order.

∙Pack the fan in the original carton and store it in a cool and dry place.

SPECIFICATIONS

Model No.: FS40-G5

Voltage: 120V, 60Hz