OPERATING INSTRUCTIONS
Carry Handle/Filter Cover (behind unit)
Dust Filter
(inside Carry Handle/
Filter Cover)
|
| B |
|
|
|
|
| |
|
|
|
|
| A | |||
|
|
|
|
|
|
|
|
|
|
|
|
|
| Control Panel Functions | |||
|
|
|
|
|
|
|
|
|
| A | Power Switch | B | Thermostat Control | ||||
|
|
|
|
|
|
|
|
|
•Place the heater on a firm level surface free from obstructions, and at least 3 ft. away from any wall and any other objects such as furniture, curtains, plants or combustible material.
•With the Power Switch “A” in the ”OFF” position, plug the heater into a polarized 120V outlet.
•Turn the heater ”ON” by pressing the Power Switch “A”. The Power Switch Light will illuminate.
•Set the desired temperature by turning the Thermostat Control “B” dial “clockwise” to increase the temperature or “counter clockwise” to decrease the temperature.
IMPORTANT!
Your heater is equipped with a polarized alternating current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your outlet. DO NOT defeat the safety purpose of the polarized plug.
CAUTION: This heater includes a Thermal
PLACEMENT OF THE UNIT IN ROOM
For most efficient heating, place the heater on the floor where the air is cooler, and about 3 feet from any wall. To heat your room, the heater will be most efficient when placed near an outside door, the bottom of a staircase, or where colder air is most likely to be entering the room.
CLEANING THE DUST FILTER
The filter collects dirt and dust from air circulating through the heater. To clean the filter, remove the Carry Handle/Filter Cover first, remove the filter, rinse it with warm water and allow it to dry before reinstalling.
