Page 10

Section 3. Installation

3.1Power Center Mounting

1.The Power Center should be located at or near the equipment pad. Locate the Power Center at least five (5) feet or more away from pool/spa and five (5) feet off the ground. All national, state, and local codes are applicable.

NOTE For Canadian installations, the Power Center must be at least three (3) meters (9.8 feet) away from the pool/spa and 1.5 meters (5 feet) above the ground.

2.Use the mounting brackets and instructions provided with the Standard Power Center and/or Sub-Panel Power Center.

3.Sub-Panel Power Centers have special code requirements. Be sure to follow all applicable local and state codes to insure safe installation.

NOTE The Power Center is not to be considered as suitable for use as Service Equipment. Therefore, it is required to have the appropriate means of disconnection, circuit isolation, and/or branch circuit protection installed upstream of the Power Center.

3.2High Voltage Wiring

3.2.1System Power

WARNING

Potentially high voltages in the AquaLink RS Power Center can create dangerous electrical hazards, possibly causing death, serious injury or property damage. Turn off power at the main circuit feeding the AquaLink RS Power Center to disconnect the Power Center from the system.

Depending on the amount of equipment being controlled, run ½" or larger conduit from the power supply panel to the bottom of the Power Center. If you are using the Sub-Panel Power Center, wire power to the appropriate breakers. Pull in appropriate wire for equipment. Each piece of equipment requires its own high voltage relay. Connect 120 volts to the Power Center terminals. Connect equipment ground(s). See Figures 1 and 2.

ment

 

Transformer

 

compart

 

 

 

Primary

 

voltagein this

 

Black

high

 

White

not run

 

 

 

Lowvoltage raceway, do

Filter Pump Relay

Aux. 3 Relay

 

 

Wire nut to

 

 

 

120 VAC power

 

Earth Ground

Neutral

l

To 120 VAC

Breaker

Breaker Panel

Figure 1. Standard Power Center

 

 

Transformer

compartment

 

Primary

Black

 

White

raceway, do not run high voltage in this

 

 

White

 

Black

Low voltage

 

 

 

 

 

 

 

 

Black

 

White

 

Ground

Earth Ground

 

 

 

From Main

 

 

 

 

 

 

 

 

 

 

Power

Figure 2. Sub-Panel Power Center

Page 10
Image 10
Pentair P4, PS8, PS4, PS6 Installation, Power Center Mounting, High Voltage Wiring System Power, Neutral, Breaker Panel

PS8, P4, PS6, PS4, and P8 specifications

Pentair, a global leader in water treatment and flow solutions, continues to innovate with its robust line of products designed for both residential and commercial applications. Among these, the P8, PS4, PS6, P4, and PS8 models exemplify Pentair's commitment to delivering efficiency, quality, and performance in water management.

The Pentair P8 is renowned for its high-capacity performance, offering substantial flow rates suitable for larger homes or commercial establishments. This system is equipped with advanced filtration technologies that remove contaminants while retaining essential minerals. Its compact design makes it easy to install in various settings, and it operates quietly, ensuring minimal disruption to daily activities.

Next in line is the PS4, a powerful solution designed for medium-sized applications. The PS4 features a multi-stage filtration system, which enhances water purity and taste. With energy-efficient components, it minimizes operational costs while ensuring top-tier performance. The unit is also designed for easy maintenance, allowing users to replace filters with minimal effort, thus prolonging the system's lifespan.

The PS6 model offers enhanced capabilities, integrating advanced monitoring technology that provides real-time data on water quality and system performance. This connectivity feature allows users to identify potential issues early and optimize their usage patterns. The PS6 is particularly suited for households with stricter water quality requirements, making it ideal for families or individuals highly conscious of their water purity.

The P4 model is specifically designed for smaller residential applications. Despite its compact size, the P4 does not compromise on effectiveness. It utilizes innovative filtration materials that deliver excellent contaminant removal rates, making it a reliable choice for personal and environmental health. Its user-friendly interface and low maintenance requirements make it a favorite among homeowners.

Lastly, the PS8 represents the pinnacle of Pentair's technology, designed for larger-scale commercial use. It boasts an impressive filtration capacity paired with advanced water quality monitoring and control systems. The PS8 effectively manages higher volumes of water, ensuring consistent output quality under varying conditions. Its durable construction and high efficiency provide significant cost savings over time, making it a wise investment for enterprises.

In summary, Pentair continues to lead the industry with its diverse range of water treatment solutions. The P8, PS4, PS6, P4, and PS8 models offer distinct features tailored to meet varying needs, while their proprietary technologies ensure that consumers receive safe and clean water efficiently, paving the way for healthier communities.