Pentair Side Pool Cleaner E. Cutting the Feed Hose - cont, Feed Mast, Mender Nut, Swivel

E. Cutting the Feed Hose - (cont.)

8.When cutting hoses, please use strong scissors or a sharp knife. Be sure to slide the floats out of the way when cutting hose.

9.Put extra mender nut on the Legend® Platinum mast and push soft hose gently over mast at 1/2 in., turn mender nut around soft hose tight.

Note: The Back-Up Valve still should be 30 in. from the head of the cleaner.

	FEED HOSE
FEED MAST	MENDER NUT
SWIVEL

10.Now take the bag, EU16, out of the box and firmly twist lock the bag onto the top of the Legend® Platinum throat over rubber debris valve.

11.Review and check list: Hoses cut properly and floats evenly spaced. Mender nuts tight around swivels, back up valve, Legend® Platinum mast and wall fitting. Make sure wall fitting is securely locked into place.

12.Lower your complete Legend® Platinum assembly into your pool carefully. It should look like figure below.

FIRST		SECOND	THIRD
SWIVEL		SWIVEL
			SWIVEL
	LONG	LONG
	WHITE	WHITE	BACK UP
SHORT	HOSE	HOSE
			VALVE
WHITE
HOSE
		CLEAR
		HOSE

13.Go back to your equipment and turn filter pump on first (wait 30 seconds to force air out of the hose), then turn booster pump on.

14.For large pools requiring more hose length you will need to purchase one (1) additional hose (LLD45-White or LLD45PM-Gray), four (4) floats (ED10P-White or LLD10PM-Gray), one (1) swivel (ED05-White or LLD05PM-Gray), and two (2) mender nuts (ED15-White or LLD16PM-Gray). Attach extra hose between long hoses using floats, swivel and mender nuts. Divide extra hose overage by three (3) this time to keep all hoses the same length.

6

LEGEND® PLATINUM INSTALLATION MANUAL