26UNLOADING THE FILM IN MID-ROLL

(PREPARATION) OPERATION BASIC

1

2

If you wish to remove the film before exposing all the frames, use this function.

1.Set the main switch to [ ON ].

2.Press the mid-roll wind-up button fully with a fine-pointed object. The film will wind com- pletely.

3.Before detaching the film holder, check that

[ ] is displayed on the LCD panel.

3

4

4.While firmly holding the wound film roll, affix the paper seal securely on the back of the paper leader to prevent from accidental unwinding of the exposed roll.

•The number of exposed frames on the LCD panel disappears from the LCD panel.

•When removing the film from the camera, protect it from exposure to direct sun light.